xbee receiving samples from end device

Nov 7, 2011 at 9:27 PM


I got one xbee ("slave") configured to send sample data every 5 seconds to a second xbee ("master"). I see activity on the usb explorer board of the master every 5 seconds but the event FrameReceived is never triggered. Directly using the SerialPort class does work, every 5 seconds I'm receiving data. If I execute a remote AT command from the master to the slave then the FrameReceived event is triggered with the data from the slave.

Should receiving sample data from the slave be handled in a different way?

BTW, I'm using XBee's Series 1.